User`s manual

Version 5.4 267 May 2008
SIP User's Manual 3. Web-Based Management
¾ To load an auxiliary file to the device using the Web interface, take
these 6 steps:
1. Open the 'Load Auxiliary Files' page (Management tab > Software Update menu >
Load Auxiliary Files page item).
Figure 3-111: Load Auxiliary Files Page
2. Click the Browse button corresponding to the file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
3. Click the Load File button corresponding to the file you want to load.
4. Repeat steps 2 through 3 for each file you want to load.
5. To save the loaded auxiliary files to flash memory, refer to ''Saving Configuration'' on
page 265.
6. To reset the device (if you have loaded a Call Progress Tones file), refer to ''Resetting
the Device'' on page 262.