User`s manual

Version 5.4 235 May 2008
SIP User's Manual 3. Web-Based Management
3.4.5.8 Configuring the Digital Gateway Parameters
The 'Digital Gateway Parameters' page allows you to configure miscellaneous digital
parameters.
¾ To configure the digital gateway parameters, take these 4 steps:
1. Open the 'Digital Gateway Parameters' page (Configuration tab > Protocol
Configuration menu > Digital Gateway submenu > Digital Gateway Parameters
page item).
Figure 3-96: Digital Gateway Parameters Page
2. Configure the Digital Gateway parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.