User`s manual

SIP User's Manual 216 Document #: LTRT-83303
Mediant 1000 & Mediant 600
5. Configure the Profile's parameters according to your requirements. For detailed
information on each parameter, refer to its description on the page in which it is
configured as an individual parameter.
6. From the 'Coder Group' drop-down list, select the Coder Group (refer to ''Coder Group
Settings'' on page 212) or the device's default coder (refer to ''Coders'' on page 157) to
which you want to assign the Profile.
7. Repeat steps 2 through 6 to configure additional Tel Profiles (optional).
8. Click the Submit button to save your changes.
9. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
3.4.5.5.3 IP Profile Settings
The 'IP Profile Settings' page allows you to define up to nine different IP Profiles. You can
then assign these IP Profiles to routing rules in the 'Tel to IP Routing' page (refer to ''Tel to
IP Routing Table'' on page 200) and 'IP to Trunk Group Routing' page (refer to ''IP to Trunk
Group Routing'' on page 204). IP Profiles can also be used when working with a Proxy
server (set AlwaysUseRouteTable to 1).
Note: You can also configure the IP Profiles using the ini file table parameter
IPProfile (refer to ''SIP Configuration Parameters'' on page 323).