User`s manual
Version 5.4 197 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
TON
Select the Number Type assigned to this entry.
If you selected Unknown as the NPI, you can select Unknown [0].
If you selected Private as the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PSTN Specific [3], or
Level 0 Regional (Local) [4].
If you selected E.164 Public as the NPI, you can select Unknown [0],
International [1], National [2], Network Specific [3], Subscriber [4], or
Abbreviated [6].
Phone Context
The Phone-Context SIP URI parameter.
3.4.5.4 Configuring the Routing Tables
The Routing Tables submenu allows you to configure the device's call routing. This
submenu includes the following page items:
Routing General Parameters (refer to ''Routing General Parameters'' on page 198)
Tel to IP Routing (refer to ''Tel to IP Routing Table'' on page 200)
IP to Trunk Group Routing (refer to ''IP to Trunk Group Routing'' on page 204)
Internal DNS Table (refer to ''Internal DNS Table'' on page 207)
Internal SRV Table (refer to ''Internal SRV Table'' on page 208)
Reasons for Alternative Routing (refer to ''Reasons for Alternative Routing'' on page
209)
Release Cause Mapping (refer to Release Cause Mapping on page 211)