User`s manual

SIP User's Manual 194 Document #: LTRT-83303
Mediant 1000 & Mediant 600
Parameter Description
Presentation Determines whether Caller ID is permitted:
 Allowed = sends Caller ID information when a call is made using
these destination / source prefixes.
 Restricted = restricts Caller ID information for these prefixes.
 Not Configured = privacy is determined according to the Caller ID
table (refer to ''Caller ID'' on page 221).
Notes:
 Only applicable to Number Manipulation tables for source number
manipulation.
 If 'Presentation' is set to 'Restricted' and 'Asserted Identity Mode' is
set to 'P-Asserted', the From header in the INVITE message includes
the following: From: 'anonymous' <sip:
[e-mail]> and 'privacy: id' header.
3.4.5.3.1 Dialing Plan Notation
The dialing plan notation applies to all the Number Manipulation tables as well as to the
'Tel to IP Routing' table (refer to ''Tel to IP Routing Table'' on page 200) and to the 'IP to
Trunk Group Routing' table (refer to ''IP to Trunk Group Routing'' on page 204). The dialing
notation applies to digits entered for the destination and source prefixes to represent
multiple numbers.
Table 3-42: Dialing Plan Notations
Notation Description Example
[n-m]
Represents a range of
numbers.
Note: Range of letters is not
supported.
 [5551200-5551300]#: Represents all numbers from
5551200 to 5551300.
 123[100-200]#: Represents all numbers from
123100 to 123200.
[n,m]
Represents multiple
numbers. Note: This
notation only supports
single-digit numbers.
[2,3,4]xxx#: Represents four-digit numbers that start
with 2, 3 or 4.
x
Represents any single digit. 54324: Represents any number that starts with 54324.
Pound sign (#)
at the end of a
number
Represents the end of a
number.
54324xx#: Represents a 7-digit number that starts with
54324.
A single
asterisk (*)
Represents any number. *: Represents any number.
The device matches the rules starting at the top of the table (i.e., top rules take precedence
over lower rules). For this reason, enter more specific rules above more generic rules. For
example, if you enter 551 in entry 1 and 55 in entry 2, the device applies rule 1 to numbers
that starts with 551 and applies rule 2 to numbers that start with 550, 552, 553, 554, 555,
556, 557, 558 and 559. However if you enter 55 in entry 1 and 551 in entry 2, the device
applies rule 1 to all numbers that start with 55 including numbers that start with 551.