User`s manual

Version 5.4 191 May 2008
SIP User's Manual 3. Web-Based Management
The number manipulation is performed in the following tables:
 Destination Phone Number Manipulation Table for IP-to-Tel Calls (NumberMapIP2Tel
ini file parameter)
 Destination Phone Number Manipulation Table for Tel-to-IP Calls (NumberMapTel2IP
ini file parameter)
 Source Phone Number Manipulation Table for IP-to-Tel Calls
(SourceNumberMapIP2Tel ini file parameter)
 Source Phone Number Manipulation Table for Tel-to-IP Calls
(SourceNumberMapTel2IP ini file parameter)
Notes:
• Number manipulation can occur before or after a routing decision is
made. For example, you can route a call to a specific Hunt (analog
module) or Trunk (digital module) Group according to its original number,
and then you can remove or add a prefix to that number before it is
routed. To determine when number manipulation is performed, configure
the 'IP to Tel Routing Mode' parameter (RouteModeIP2Tel) described in
''IP to Trunk Group Routing'' on page 204, and 'Tel to IP Routing Mode'
parameter (RouteModeTel2IP) described in ''Tel to IP Routing Table'' on
page 200.
• For configuring number manipulation using ini file table parameters
NumberMapIP2Tel, NumberMapTel2IP, SourceNumberMapIP2Tel, and
SourceNumberMapTel2IP, refer to ''Number Manipulation and Routing
Parameters'' on page 364.
¾ To configure the Number Manipulation tables, take these 5 steps:
1. Open the required 'Number Manipulation' page (Configuration tab > Protocol
Configuration menu > Manipulation Tables submenu > Dest Number IP->Tel,
Dest Number Tel->IP, Source Number IP->Tel, or Source Number Tel->IP page
item); the relevant Manipulation table page is displayed (e.g., 'Source Phone Number
Manipulation Table for TelÆIP Calls' page).
Figure 3-75: Source Phone Number Manipulation Table for Tel-to-IP Calls
The figure above shows an example of the use of manipulation rules in the 'Source
Phone Number Manipulation Table for TelÆIP Calls':
• When the destination number is 035000 and source number is 20155, the source
number is changed to 97120155.
• When the source number is 1001876, it is changed to 587623.