User`s manual

Version 5.4 181 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
Stutter Tone Duration
[StutterToneDuration]
Duration (in msec) of the played stutter dial tone, indicating enabled Call
Forward or waiting message(s). The Stutter tone is played (instead of a
regular dial tone), when Call Forward is enabled on the specific port or
when Message Waiting Indication (MWI) is received. The tone is
composed of a Confirmation tone, which is played for a user-defined
duration (StutterToneDuration), followed by a Stutter tone. Both tones are
defined in the CPT file. After this duration, a dial tone is played.
The range is 1,000 to 60,000. The default is 2,000 (i.e., 2 seconds).
Notes:
 This parameter is applicable only to FXS interfaces.
 The MWI tone takes precedence over the Call Forwarding Reminder
tone. For detailed information on MWI, refer to "Message Waiting
Indication" on page 440.
MWI Subscribe Retry
Time
[SubscribeRetryTime]
Subscription retry time (in seconds) after last subscription failure.
The default is 120 seconds. The range is 10 to 7200.
Conference Parameters
Enable 3-Way
Conference
[Enable3WayConferenc
e]
Enables or disables the 3-Way Conference feature.
 [0] Disable = Disable (default)
 [1] Enable = Enables 3-way conferencing
Note: This parameter is applicable only to Mediant 1000.
Establish Conference
Code
[ConferenceCode]
Defines the digit pattern, which upon detection generates the Conference-
initiating INVITE when 3-way conferencing is enabled
(Enable3WayConference is set to 1).
The valid range is a 25-character string. The default is “!” (Hook-Flash).
Note: This parameter is applicable only to Mediant 1000.
Conference ID
[ConferenceID]
Defines the Conference Identification string (up to 16 characters). The
default value is 'conf'.
For 3-way conferencing using an external media server: The device uses
this identifier in the Conference-initiating INVITE that is sent to the media
server when Enable3WayConference is set to 1.
When using the Mediant 1000 Media Processing Module (MPM): To join a
conference, the INVITE URI must include the Conference ID string,
preceded by the number of the participants in the conference, and
terminated by a unique number.
For example: INVITE sip:4MyConference1234@10.1.10.10.
INVITE messages with the same URI join the same conference.
For example: ConferenceID = MyConference.
Note: This parameter is applicable only to Mediant 1000.