User`s manual

SIP User's Manual 176 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.4.5.2.2 Supplementary Services
The 'Supplementary Services' page is used to configure parameters that are associated
with supplementary services. For detailed information on supplementary services, refer to
''Working with Supplementary Services'' on page 437.
¾ To configure the supplementary services' parameters, take these 4
steps:
1. Open the 'Supplementary Services' page (Configuration tab > Protocol
Configuration menu > SIP Advanced Parameters submenu > Supplementary
Services page item).
Figure 3-70: Supplementary Services Page
2. Configure the supplementary services parameters according to the table below.
3. Click the Submit button to save your changes, or click the Subscribe to MWI or
Unsubscribe to MWI buttons to save your changes and to subscribe / unsubscribe to
the MWI server.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.