User`s manual

SIP User's Manual 160 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.4.5.1.5 DTMF & Dialing Parameters
The 'DTMF & Dialing' page is used to configure parameters associated with dual-tone
multi-frequency (DTMF) and dialing.
¾ To configure the DTMF and dialing parameters, take these 4 steps:
1. Open the 'DTMF & Dialing' page (Configuration tab > Protocol Configuration menu
> Protocol Definition submenu > DTMF & Dialing page item).
Figure 3-68: DTMF & Dialing Page
2. Configure the DTMF and dialing parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.