User`s manual

SIP User's Manual 146 Document #: LTRT-83303
Mediant 1000 & Mediant 600
Parameter Description
SIP Maximum RTX
[SIPMaxRtx]
Maximum number of UDP transmissions (first transmission plus
retransmissions) of SIP messages.
The range is 1 to 30. The default value is 7.
3.4.5.1.2 Proxy & Registration Parameters
The 'Proxy & Registration' page allows you to configure parameters that are associated
with Proxy and Registration.
Note: To view whether the device or its endpoints have registered to a SIP
Registrar/Proxy server, refer to 'Registration Status'' on page 287.
¾ To configure the Proxy & Registration parameters, take these 4
steps:
1. Open the 'Proxy & Registration' page (Configuration tab > Protocol Configuration
menu > Protocol Definition submenu > Proxy & Registration page item).
2. Configure the Proxy and Registration parameters according to the following table.
3. Click the Submit button to save your changes, or click the Register or Un-Register
buttons to save your changes and register / unregister to a Proxy / Registrar.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.