User`s manual

Version 5.4 141 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
Use Source Number as
Display Name
[UseSourceNumberAsD
isplayName]
Determines the use of Tel Source Number and Display Name for Tel-to-IP
calls.
 [0] No = If a Tel Display Name is received, the Tel Source Number is
used as the IP Source Number and the Tel Display Name is used as
the IP Display Name. If no Display Name is received from the Tel side,
the IP Display Name remains empty (default).
 [1] Yes = If a Tel Display Name is received, the Tel Source Number is
used as the IP Source Number and the Tel Display Name is used as
the IP Display Name. If no Display Name is received from the Tel side,
the Tel Source Number is used as the IP Source Number and also as
the IP Display Name.
 [2] Overwrite = The Tel Source Number is used as the IP Source
Number and also as the IP Display Name (even if the received Tel
Display Name is not empty).
Use Display Name as
Source Number
[UseDisplayNameAsSo
urceNumber]
Determines the use of Source Number and Display Name for IP-to-Tel
calls.
 [0] No = If IP Display Name is received, the IP Source Number is used
as the Tel Source Number and the IP Display Name is used as the Tel
Display Name. If no Display Name is received from IP, the Tel Display
Name remains empty (default).
 [1] Yes = If an IP Display Name is received, it is used as the Tel Source
Number and also as the Tel Display Name, and Presentation is set to
Allowed (0). If no Display Name is received from IP, the IP Source
Number is used as the Tel Source Number and Presentation is set to
Restricted (1).
For example: When 'from: 100 <sip:200@201.202.203.204>' is received,
the outgoing Source Number and Display Name are set to '100' and the
Presentation is set to Allowed (0).
When 'from: <sip:100@101.102.103.104>' is received, the outgoing
Source Number is set to '100' and the Presentation is set to Restricted (1).
Enable Contact
Restriction
[EnableContactRestricti
on]
Determines whether the device sets the Contact header of outgoing
INVITE requests to ‘anonymous’ for restricted calls.
 [0] = Disabled (default)
 [1] = Enabled