User`s manual

Version 5.4 133 May 2008
SIP User's Manual 3. Web-Based Management
3.4.5 Protocol Configuration
The Protocol Configuration menu allows you to configure the device's SIP parameters
and contains the following submenus:
 Protocol Definition (refer to ''Configuring the Protocol Definition Parameters'' on page
133)
 SIP Advanced Parameters (refer to ''Configuring the SIP Advanced Parameters'' on
page 165)
 Manipulation Tables (refer to ''Configuring the Number Manipulation Tables'' on page
190)
 Routing Tables (refer to ''Configuring the Routing Tables'' on page 197)
 Profile Definitions (refer to ''Configuring the Profile Definitions'' on page 212)
 Endpoint Settings (refer to "Configuring the Endpoint Settings" on page 218)
 Trunk/IP Group (refer to ''Configuring the Trunk and IP Groups'' on page 226)
 Digital Gateway (refer to "Configuring the Digital Gateway Parameters" on page 235)
 IP Media (refer to "Configuring the IPmedia Parameters" on page 242)
3.4.5.1 Configuring the Protocol Definition Parameters
The Protocol Definition submenu allows you to configure the main SIP protocol
parameters. This submenu contains the following page items:
 SIP General Parameters (refer to ''SIP General Parameters'' on page 134)
 Proxy & Registration (refer to ''Proxy & Registration Parameters'' on page 146)
 Proxy Sets Table (refer to ''Proxy Sets Table'' on page 153)
 Coders (refer to ''Coders'' on page 157)
 DTMF & Dialing (refer to ''DTMF & Dialing Parameters'' on page 160)