User`s manual

Version 5.4 125 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
RADIUS Authentication Server
IP Address
[RADIUSAuthServerIP]
IP address of the RADIUS authentication server.
RADIUS Authentication Server
Port
[RADIUSAuthPort]
Port number of the RADIUS authentication server.
The default value is 1645.
RADIUS Shared Secret
[SharedSecret]
'Secret' used to authenticate the device to the RADIUS server. Should
be a cryptographically strong password.
General RADIUS Authentication
Device Behavior Upon
RADIUS Timeout
[BehaviorUponRadiusTimeo
ut]
Defines device behavior upon a RADIUS timeout.
 [0] Deny Access = Denies access.
 [1] Verify Access Locally = Checks password locally (default).
Default Access Level
[DefaultAccessLevel]
Defines the default access level for the device when the RADIUS
(authentication) response doesn't include an access level attribute.
The valid range is 0 to 255. The default value is 200 (Security
Administrator').
Local RADIUS Password
Cache Mode
[RadiusLocalCacheMode]
Defines the device's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the user name and password (verified by
the RADIUS server).
 [0] Absolute Expiry Timer = when you access a Web page, the
timeout doesn't reset but instead, continues decreasing.
 [1] Reset Timer Upon Access = upon each access to a Web page,
the timeout always resets (reverts to the initial value configured by
RadiusLocalCacheTimeout).
Local RADIUS Password
Cache Timeout
[RadiusLocalCacheTimeout]
Defines the time (in seconds) the locally stored user name and
password (verified by the RADIUS server) are valid. When this time
expires, the user name and password become invalid and a must be
re-verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default value is 300 (5
minutes).
 [-1] = Never expires.
 [0] = Each request requires RADIUS authentication.
RADIUS VSA Vendor ID
[RadiusVSAVendorID]
Defines the vendor ID that the device accepts when parsing a
RADIUS response packet.
The valid range is 0 to 0xFFFFFFFF. The default value is 5003.
RADIUS VSA Access Level
Attribute
[RadiusVSAAccessAttribute
]
Defines the code that indicates the access level attribute in the
Vendor Specific Attributes (VSA) section of the received RADIUS
packet.
The valid range is 0 to 255. The default value is 35.
EtherDiscover Setting
EtherDiscover Operation
Mode
N/A.