User`s manual

Version 5.4 123 May 2008
SIP User's Manual 3. Web-Based Management
3.4.4.5 Configuring the General Security Settings
The 'General Security Settings' page is used to configure various security features.
¾ To configure the general security parameters, take these 4 steps:
1. Open the 'General Security Settings' page (Configuration tab > Security Settings
menu > General Security Settings page item).
Figure 3-62: General Security Settings Page
2. Configure the General Security parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.