User`s manual

Version 5.4 113 May 2008
SIP User's Manual 3. Web-Based Management
¾ To change the Web user accounts attributes, take these 4 steps:
1. Open the 'Web User Accounts' page (Configuration tab > Security Settings menu >
Web User Accounts page item).
Figure 3-57: Web User Accounts Page (for Users with 'Security Administrator' Privileges)
2. To change the access level of the secondary account (the access level of the primary
account cannot be changed), from the 'Access Level' drop-down list, select the new
access level, and then click Change Access Level; the new access level is applied
immediately. Note that access level can only be modified by the Web user with
'Security Administrator' access level.
3. To change the user name of an account, perform the following:
a. In the field 'User Name', enter the new user name (maximum of 19 case-sensitive
characters).
b. Click Change User Name; the new user name is applied immediately and the
'Enter Network Password' screen appears.
c. In the 'Enter Network Password' screen, enter the new user name.
4. To change the password of an account, perform the following:
a. In the field 'Current Password', enter the current password (maximum of 19 case-
sensitive characters).
b. In the fields 'New Password' and 'Confirm New Password', enter the new
password.
c. Click Change Password; the new password is applied immediately and the
'Enter Network Password' screen appears.
d. In the 'Enter Network Password' screen, enter the new password.