Quick Guide
Table Of Contents
- Before Installing
- Physical Description
- Cabling the Phone
- Attaching Stand to Phone
- Signing in
- /Changing your Presence Status
- Basic Phone Operation
- Connecting to a Router via Wi-Fi
- Enabling / Disabling Wi-Fi Capabilities
- Configuring Wi-Fi Network Parameters
- Supported Authentication Methods
- Status
- Configuring Bluetooth
12. Status
The Device Status>Wi-Fi screen provides the following basic information:
Network name
Authentication method
Note:
• An icon indicating Wi-Fi signal strength is also displayed, on the screen’s upper bar. select
the icon for the Wi-Fi Network Info screen to open.
• If a Wi-Fi connection has been set up and established, it will be used even if a LAN
connection exists.
13. Configuring Bluetooth
The Bluetooth interface is used to connect the phone to a wireless headset or speaker.
To pair and connect a remote Bluetooth device:
1. Press the phone’s MENU hard key and select the Administration option.
2. Enter the administrator’s password.