User`s manual

420HD IP Phone with Microsoft Lync
User's Manual 22 Document #: LTRT-11891
3.5 Signing In
This section shows how to sign in.
 To sign in with your user password (default sign-in method):
Note:
 You can sign in with your user password (default sign-in method) or with your
PIN code provided by your IT administrator.
 If you select the PIN code method and then sign out, PIN code will be presented
the next time you sign in, in which case you can switch back to the password
method if you need to.
1. In the idle screen, press the Sign in softkey on the device; the LCD displays the Sign in
screen:
2. Enter your email address. To switch from lower case alphabetical letters to numbers and
symbols, see Section 3.4 on page 20.
3. Navigate to the User name screen and enter your domain name, backslash, and User Name:
4. Navigate down to the Password screen:
5. Enter your Password (the same password you use to access your PC) and press the Sign in
softkey that's displayed after entering the first character of the password.
You're now signed in.