Product specifications

Administrator's Manual 6. Troubleshooting
Version 2.0.1 81 May 2013
6.7.6 Enabling Recording to Debug Voice
Recording capability enables you to debug the voice activity of the phone. Enable the
feature from the Web interface or using the configuration file.
 To define media debug information:
 Using the Web interface:
1. Access the Recording page (Status & Diagnostics tab > Diagnostics menu >
Recording).
Figure 6-8: Web Interface - Recording
2. Configure using the table below as reference and click Submit.
 Using the configuration file:
Table 6-2: Packet Recording Parameters
Parameter
Description
Enable DSP Recording
[voip/packet_recording/enabled]
Activates the packet recording
mechanism.
 [0] Disable (default)
 [1] Enable
Remote IP Address or Host Name
[voip/packet_recording/remote_ip]
The IP address (in dotted-decimal
notation) of the remote computer to
which the recorded packets are sent.
The recorded packets should be
captured by a network sniffer (such as
Wireshark).
The default value is 0.0.0.0.
Remote Port
[voip/packet_recording/remote_port]
Defines the UDP port of the remote
computer to which the recorded
packets are sent.
The valid range is 1024 to 65535. The
default value is 50000.
Enable RTP Recording
[voip/packet_recording/rtp_recording/enabled]
Activates the DSP RTP recording.
 [0] Disable (default)
 [1] Enable