Product specifications

Administrator's Manual 3. Creating a Configuration File for Auto Provisioning via DHCP
Version 2.0.1 39 May 2013
3.9.2 Configuring Tone Volume
This section shows how to configure Tone volume using the Web interface or the
configuration file.
 To configure tone volume:
 Using the Web interface:
1. Access the Volume Setting page (Configuration tab > Voice Over IP menu >
Volume Settings).
Figure 3-17: Web Interface - Tone Volume
2. Configure using the table below as reference and click Submit.
 Using the configuration file:
Table 3-18: Tone Volume Parameter
Parameter
Description
Tone Volume
[voip/audio/gain/tone_signal_level]
Call progress tone volume. This volume can be modified
on-the-fly by pressing the phone’s VOLUME key in certain
scenarios.
The valid range is 1 to 31 (-dB). The default value is 10 (-
10dB).
3.9.3 Configuring Ringer Volume
This section shows how to configure ringer volume using the Web interface or the
configuration file.
 To configure the ringer volume:
 Using the Web interface:
1. Access the Volume Setting page (Configuration tab > Voice Over IP menu >
Volume Settings).
Figure 3-18: Web Interface - Ringer Volume
2. Configure using the table below as reference and click Submit.
 Using the configuration file:
Table 3-19: Ringer Volume Parameters
Parameter
Description
Ringer Volume
voip/audio/gain/ringer_signal_level
Ringing tone volume. This volume can be modified on-the-
fly by pressing the phone’s VOLUME key when the phone
is in idle state.
The valid range is [-31] to [31] dB