Product specifications

Administrator's Manual 3. Creating a Configuration File for Auto Provisioning via DHCP
Version 2.0.1 35 May 2013
3.8 Activating Services
This section shows how to activate phone services.
3.8.1 Activating Automatic Dialing
This section shows how to activate Automatic Dialing using the Web interface or the
configuration file.
 To activate automatic dialing:
 Using the Web interface:
1. Access the Dialing page (Configuration tab > Voice Over IP menu > Dialing).
Figure 3-14: Web Interface - Automatic Dialing
2. Configure using the table below as reference and click Submit.
 Using the configuration file:
Table 3-14: Automatic Dialing Parameters
Parameter
Description
Activate
[voip/dialing/auto_dialing/enabled]
Determines whether automatic dialing is enabled (i.e.,
phone number is automatically dialed when you off-
hook the phone).
 [0] Disable (default)
 [1] Enable
Timeout
[voip/dialing/auto_dialing/timeout]
Timeout (in seconds) before automatic dialing occurs
after the phone is off-hooked. When set to 0,
automatic dialing is performed immediately.
The valid range is 0 to 120. The default value is 15.
Destination Phone Number
[voip/dialing/auto_dialing/destination]
The number that is automatically dialed when the
phone is off-hooked.
The valid value can be up to 32 characters.