Product specifications

Administrator's Manual 3. Creating a Configuration File for Auto Provisioning via DHCP
Version 2.0.1 23 May 2013
3.3 Configuring LAN and PC Port Settings
Port settings can be configured using the Web interface or the configuration file.
Note: The optional values of the configuration file parameters are enclosed in square
brackets while its corresponding Web interface values are written outside the
square brackets, for example, [1] Enable.
 To define the phone’s port settings:
 Using the Web interface:
1. Access the LAN Settings page (Configuration tab > Network Connections
menu > LAN Settings).
Figure 3-3: Web Interface - Port Mode
2. Configure using the table below as reference and click Submit.
 Using the configuration file:
Table 3-3: Port Settings Parameters
Parameter
Description
LAN Port Mode
[network/lan/port_mode]
Sets the LAN port mode.
Valid values are :
[AUTOMATIC] = Auto negotiation.
[FULL_10] = 10Mbps + full duplex
[FULL_100] = 100Mbps + half duplex
[HALF_10] = 10Mbps + full duplex
[HALF_100] = 100Mbps + half duplex
PC Port Mode
[network/pc/port_mode]
Sets the computer port mode.
See valid values above.