Product specifications

Administrator's Manual 3. Creating a Configuration File for Auto Provisioning via DHCP
Version 2.0.1 21 May 2013
3.2 Configuring DHCP Settings
In the Web interface's Network Settings page (see above), select the Automatic IP
(DHCP) option. The following parameter settings can be configured in the Web interface
and the configuration file:
Table 3-2: DHCP Parameters
Parameter
Description
Partial DHCP
network/lan/dhcp
This sub-section defines the parameters to
configure if lan_type is configured to "DHCP".
Domain Name - Manual
[network/lan/dhcp/domain_name/enabled]
Enables setting the domain name manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled,
network/lan/fixed_ip/domain_name must also
be set.
IP Address - Manual
[network/lan/dhcp/ip_address/enabled]
Enables setting the IP address manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled,
network/lan/fixed_ip/ip_address must be set.
Subnet Mask - Manual
[network/lan/dhcp/netmask/enabled]
Enables setting the network mask manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled, network/lan/fixed_ip/netmask
must be set.
[network/lan/dhcp/gateway/enabled]
Enables setting the default gateway manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled, network/lan/fixed_ip/gateway
must be set.
Primary DNS - Manual
[network/lan/dhcp/primary_dns/enabled]
Enables setting the primary DNS manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled,
network/lan/fixed_ip/primary_dns must be set.
Secondary DNS - Manual
network/lan/dhcp/secondary_dns/enabled
Enables setting the secondary DNS manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled,
network/lan/fixed_ip/secondary_dns must be
set.