Product specifications

Administrator's Manual 3. Creating a Configuration File for Auto Provisioning via DHCP
Version 2.0.1 19 May 2013
b. Press the Edit softkey:
c. Enter the new address in dotted-decimal notation, using the following keys:
 Navigation control: moves the cursor left or right in the IP address
 Clear softkey: deletes the digit to the left of the cursor.
d. Press the Save and then Apply softkey.
5. Navigate to and configure Netmask, Gateway, Primary DNS and Secondary DNS as
you did IP Address.
 To change LAN Connection Type in the Web interface:
1. Access the Network Settings page (Configuration tab > Network Connections
menu > Network Settings) and select the Static IP option:
Figure 3-2: Web Interface - Network Settings
2. Configure the parameters using the table below as reference and click Submit.
Table 3-1: Network Settings
Parameter
Description
Note: To add a value to these parameters, enter network/ followed by the parameter name, equal
sign and then the value (e.g. network/lan_type=DHCP).
IP Type
[network/lan_type]
Defines the IP addressing method:
 [STATIC] Static IP - Phone’s IP address is defined
manually
 [DHCP] Automatic IP DHCP (default) - Phone’s IP
address is acquired automatically from a DHCP
server
network/lan/fixed_ip
This section defines parameters relevant if 'lan_type'
is configured to STATIC or the corresponding
'network/lan/dhcp' parameter is set to 1.
IP Address
[network/lan/fixed_ip/ip_address]
The LAN IP address