Product specifications

Administrator's Manual 3. Creating a Configuration File for Auto Provisioning via DHCP
Version 2.0.1 17 May 2013
3 Creating a Configuration File for Auto
Provisioning via DHCP
Note: This section is intended for distributors / integrators responsible for configuring
IP phones specific to customer countries / time zones / environments.
The sections below show how to configure a single IP phone.
After configuring, you'll then save the configuration as a cfg file on your PC and apply it to
all IP phones deployed in the customer's enterprise, downloaded automatically from a
provisioning server using DHCP (see Section 2.2 on page 13).
 To save the cfg file you configure:
1. Access the Configuration File page in the Web interface (Management tab > Manual
Update menu > Configuration File):
Figure 3-1: Web Interface - Configuration File
2. Click the Save Current Configuration File button and save the cfg file in a folder on
your PC.
3. Apply the cfg file to all IP phones in the customer's enterprise (see Section 2.2 on
page 13).
Note: When creating a new configuration file, ensure that the system/type parameter
in the cfg file is set to the proper phone model (e.g.,420HD).
Read the sections below for information on how to configure a single phone.