Specifications

Administrator's Manual 17. SIP Settings
Version 2.0.0 95 October 2012
Parameter Description
Use SIP Proxy IP and Port for Registration
voip/signalling/sip/use_proxy_ip_port_for_registrar
Determines whether to use the SIP proxy’s IP
address and port for registration. When
enabled, there is no need to configure the
address of the registrar separately.
 [0] Disable (default)
 [1] Enable
Registrar IP Address or Host Name
voip/signalling/sip/sip_registrar/addr
The IP address or host name of the Registrar
server.
The default value is 0.0.0.0.
Registrar Port
voip/signalling/sip/sip_registrar/port
The UDP or TCP port of the Registrar server.
The valid range is 1024 to 65535. The default
value is 5060.
Use SIP Outbound Proxy
[voip/signalling/sip/sip_outbound_proxy/enabled]
Determines whether an outbound SIP proxy
server is used (all SIP messages are sent to
this server as the first hop).
 [0] Disable (default)
 [1] Enable
Outbound Proxy IP Address or Host Name
[voip/signalling/sip/sip_outbound_proxy/addr]
The IP address of the outbound proxy. If this
parameter is set, all outgoing messages
(including Registration messages) are sent to
this Proxy according to the Stack behavior.
The default value is 0.0.0.0.
Outbound Proxy Port
[voip/signalling/sip/sip_outbound_proxy/port]
The port on which the outbound proxy listens.
The valid range is 1024 to 65535. The default
value is 5060.