Specifications

Administrator's Manual 16. Enabling Telnet Access
16 Enabling Telnet Access
Telnet access can be enabled using the Web or Configuration File, as described below.
 To enable Telnet:
 Using the Web:
1. Access the ‘Telnet’ page (Management tab > Remote Management menu >
Telnet).
Figure 16-1: Telnet Web Field
2. Enable Telnet according to the parameter in the table below, and then click
Submit.
 Using the Configuration File:
Table 16-1: Telnet Parameters
Parameter Description
Note: To add a value to these parameters, enter management/ followed by the parameter name,
equal sign and then the value (e.g. management/telnet/enabled=0).
Activate
[management/telnet/enabled]
Enables telnet access to the phone.
 [0] Disable (default)
 [1] Enable
The user name and password for telnet access are according to
the parameters: system/user_name and system/password.
Version 2.0.0 85 October 2012