Specifications

Administrator's Manual 15. VLAN Settings
15 VLAN Settings
VLAN settings can be configured using the Web or Configuration File, as described below.
 To configure the phone’s VLAN settings:
 Using the Web:
1. Access the ‘Network Settings’ page (Configuration tab > Network Connections
menu > Network Settings).
Figure 15-1: VLAN Web Fields
2. Configure the VLAN settings according to the parameters in the table below, and
then click Submit.
 Using the Configuration File:
Table 15-1: VLAN Parameters Description
Parameter Description
VLAN Discovery Mode
[network/lan/vlan/mode]
Determines the VLAN mode of operation.
 [Disable] Disable
 [Manual] Manual Configuration of LAN - Static
configuration of VLAN ID and priority
 [CDP] Automatic Configuration of VLAN - VLAN
discovery mechanism based on Cisco Discovery
Protocol (CDP)
 [LLDP] Automatic Configuration of VLAN - VLAN
discovery mechanism based on LLDP.
 [CDP_LLDP] Automatic Configuration of VLAN
(default) - VLAN discovery mechanism based on
LLDP and Cisco Discovery Protocol (CDP). LLDP
protocol is with higher priority.
Period
[network/lan/vlan/period]
The time period in seconds between discovery
messages when configured to CDP, LLDP or CDP and
LLDP.
The default value is 30.
VLAN ID
[network/lan/vlan/id]
The VLAN ID.
The valid range is 0 to 4096. The default VLAN ID is 0.
VLAN Priority
[network/lan/vlan/priority]
The priority of traffic pertaining to this VLAN.
The valid range is 0 to 7 (where 7 is the highest
priority). The default VLAN priority is 0.
Version 2.0.0 83 October 2012