Specifications

Administrator's Manual 14. LAN and PC Port Settings
14 LAN and PC Port Settings
Port settings can be configured using the Web or Configuration File, as described below.
Note: The optional values of the Configuration file parameters are enclosed in
square brackets while its corresponding Web values are written outside
the square brackets, for example, [1] Enable.
 To define the phone’s port settings:
 Using the Web:
1. Access the ‘LAN Settings’ page (Configuration tab > Network Connections
menu > LAN Settings).
Figure 14-1: Port Mode Web Fields
2. Configure Port Mode according to the parameters in the table below, and then
click Submit.
 Using the Configuration File:
Table 14-1: Port Settings Parameters
Parameter Description
LAN Port Mode
[network/lan/port_mode]
Sets the LAN port mode.
Valid values are :
[AUTOMATIC] = Auto negotiation.
[FULL_10] = 10Mbps + full duplex
[FULL_100] = 100Mbps + half duplex
[HALF_10] = 10Mbps + full duplex
[HALF_100] = 100Mbps + half duplex
PC Port Mode
[network/pc/port_mode]
Sets the computer port mode.
See valid values above.
Version 2.0.0 81 October 2012