Specifications

310HD, 320HD and 420HD IP Phones
13.1.1.3 420HD IP Phone
The procedure for configuring Static IP Address on the 420HD IP Phone using the Phone
User Interface is identical to that for the 320HD IP Phone. The phone’s LAN connection
interface can be manually defined (static IP address) or automatically provisioned using a
DHCP server from where the LAN IP address is obtained.
 To configure the phone’s LAN connection type:
1. Access the Settings screen (MENU key > Administration > Network Settings).
2. Press the Select softkey to select LAN Connection Type; the Settings prompt is
displayed:
3. Press the navigation control's lower rim to navigate to Static IP or Automatic IP
(DHCP) IP addressing scheme.
4. Press the Select softkey. If you selected Static IP in Step 3, continue with Step 5;
else skip to Step 6.
5. Define a static IP addressing scheme:
a. Press the Edit softkey; the Static IP screen appears:
b. To configure each required network parameter, i.e., IP Address, Netmask,
Gateway, Primary DNS and Secondary DNS, choose the parameter using the
navigation control's lower or upper rim to navigate to it, and then press the Edit
softkey, for example, navigate to IP Address and press the Edit softkey:
Administrator's Manual 74 Document #: LTRT-09910