Specifications

310HD, 320HD and 420HD IP Phones
4. If you selected the Static IP option, the following screen appears:
a. Select the required network parameter (IP Address, Netmask, Gateway,
Primary DNS, and/or Secondary DNS), and then press the ENTER key; the
screen prompts you to enter the IP address of the selected network parameter
(e.g., static IP address below):
b. Enter the required value, and then press the ENTER key; the setting is applied.
c. Repeat steps 4.a through 4.c for each required network parameter.
5. Press the left Navigation key until you are prompted to save settings, as shown
below:
6. Select the Yes option (using the and Navigation keys), and then press the
ENTER key; the network settings are saved.
13.1.1.2 320HD IP Phone
The phone’s LAN connection interface can be manually defined (static IP address) or
automatically provisioned using a DHCP server from where the LAN IP address is
obtained.
 To configure the phone’s LAN connection type:
1. Access the Settings screen (MENU key > Administration menu > Network Settings
submenu).
Administrator's Manual 72 Document #: LTRT-09910