Specifications

Administrator's Manual 13. IP Network Settings
13 IP Network Settings
The following section describes how to configure IP Network Settings including:
 Static IP Address
 Partial DHCP
13.1 Configuring Static IP Address
The static IP address can be configured using the following:
 Phone User Interface
 Web and Configuration File
13.1.1 Configuring the Static IP Address using Phone User Interface
The procedures for configuring the Static IP Address on the 310HD IP Phone, 320HD IP
Phone and 420HD IP Phone using the Phone User Interface, are described below.
13.1.1.1 310HD IP Phone
The phone’s LAN connection interface can be manually defined (static IP address) or
automatically configured using a DHCP server from where the LAN IP address is obtained.
 To configure the phone’s LAN connection type:
1. Access the Network Settings screen (MENU key > Administration menu > Network
Settings > LAN Conn. Type).
The following screen appears:
2. Choose one of the following IP addressing schemes (using the and Navigation
keys), and then press the ENTER key (the asterisk appears alongside your selection):
• Static IP
• Auto. IP (DHCP)
3. Press the ENTER key again. If you selected Static IP, then continue with Step 4;
otherwise, skip to Step 5.
Version 2.0.0 71 October 2012