Specifications

Administrator's Manual 12. Configuring Date and Time
Version 2.0.0 65 October 2012
Parameter Description
End Time
[system/daylight_saving/end_date]
This sub-section defines the ending day for the
daylight saving offset.
 [month] - defines the specific month in a
year
 [day] - defines the specific day in a month
 [hour] - defines the specific hour in a day
 [minute] - defines the specific minute in an
hour
For example: To configure the phone to end the
daylight savings on July 16
th
at 22:15, set the
following:
system/ntp/daylight_saving/end_date/month
=7
system/ntp/daylight_saving/end_date/day=16
system/ntp/daylight_saving/end_date/hour=2
2
system/ntp/daylight_saving/end_date/minute
=15
End Time
[system/daylight_saving/end_date/month]
The month in a year.
The valid range is 1 to 12.
End Time
[system/daylight_saving/end_date/day]
The day in a month.
The valid range is 1 to 31.
End Time
[system/daylight_saving/end_date/hour]
The hour in the day
The valid range is 0 to 23.
End Time
[system/daylight_saving/end_date/minute]
The minute in an hour.
The valid range is 0 to 59.
Offset
[system/daylight_saving/offset]
The offset value for the daylight saving.
The valid range is 0 to 180. The default offset is
60.
/system/daylight_saving/mode
Configures the daylight saving mode.
Valid values are
[Fixed]= Date is specified as: Month, Day of
month.
[DayOfWeek]= Date is specified as: Month,
Week of month, Day of week.
/system/daylight_saving/start_date/week
Relevant to “Day of week” mode:
The week of month (values 1-5) for start of
daylight saving time.