Specifications

Administrator's Manual 12. Configuring Date and Time
12 Configuring Date and Time
Generally, a phone retrieves the date and time from a Network Time Protocol (NTP) server
when it connects to the Internet. Alternatively, the date and time can be configured
manually. NTP is a protocol for distributing the Coordinated Universal Time (UTC) by
means of synchronizing the clocks of computer systems over packet-switched, variable-
latency data networks.
Note: By default, the network settings are configured for automatic
provisioning. However, if you need to change them, you can do it
manually as is described in this part.
12.1 Configuring Date and Time
The date and time can be configured using the Web or Configuration File, as described
below.
 To configure the date and time:
 Using the Web:
1. Access the ‘Date and Time’ page (Configuration tab > Advanced Applications
menu > Date and Time).
Figure 12-1: Date and Time Web Fields
2. Configure the date and time according to the parameters in the table below, and
then click Submit.
Version 2.0.0 63 October 2012