Specifications

Administrator's Manual 9. Obtaining Firmware and Configuration
9.1.1.1 Configuring DHCP Option 160
DHCP Option Value 160 can be configured using the Web as shown below.
 To configure DHCP Option 160:
 Using the Web:
1. Access the ‘Automatic Update page (Management tab > Automatic Update
menu > Automatic Provisioning).
Figure 9-2: Automatic Provisioning - DHCP Option 160 Web Fields
2. From the ‘Provisioning Method’ drop-down list, select DHCP Option (Dynamic
URL).
3. In the ‘DHCP Option Value’ field, enter “160”.
4. Configure the remaining parameters, and then click Submit.
5. After reboot, confirm that the firmware and configuration files have been updated.
9.1.1.2 Configuring DHCP Options 66 and 67
DHCP Options 66 and 67 can be configured using the Web as shown below.
 To configure DHCP Options 66 and 67:
 Using the Web:
1. Access the ‘Automatic Update page (Management tab > Automatic Update
menu > Automatic Update).
Figure 9-3: Automatic Provisioning - DHCP Options 66/67 Web Fields
2. From the ‘Provisioning Method’ drop-down list, select DHCP Option (Dynamic
URL).
3. In the ‘DHCP Option Value’ field, enter “0”.
4. Configure the remaining parameters, and then click Submit.
5. After reboot, confirm that the firmware and configuration files have been updated.
Version 2.0.0 47 October 2012