Specifications

Administrator's Manual 9. Obtaining Firmware and Configuration
9 Obtaining Firmware and Configuration
The Web interface allows you to perform the following:
 Automatic update of firmware and configuration files
 Manual update of firmware and configuration files
9.1 Methods
There are three different ways of configuring automatic provisioning:
 DHCP
 Static DNS Record
 Using SIP SUBSCRIBE and NOTIFY Messages
9.1.1 DHCP
Dynamic Host Configuration Protocol (DHCP) can be used to configure automatic
provisioning. The DHCP feature can be configured using the Web or Configuration File, as
described below
 To configure with DHCP:
 Using the Web:
1. Access the ‘Automatic Update page (Management tab > Automatic Update
menu > Automatic Provisioning).
Figure 9-1: Automatic Provisioning Web Fields
2. Configure automatic update of firmware and configuration files according to the
parameters in the table below, and then click Submit.
Version 2.0.0 43 October 2012