Specifications

Administrator's Manual A. Server-Specific Configuration
44 Port Mirroring
Port mirroring can be configured using the Web or Configuration File, as described below.
 To configure port mirroring:
 Using the Web:
1. Access the ‘Recording’ page (Configuration tab > Network Connections menu
> Network Settings).
Figure 44-1: Port Mirroring
2. Configure port mirroring according to the parameters in the table below, and then
click Submit.
 Using the Configuration File:
Table 44-1: Port Mirroring Parameters
Parameter Description
Activate
[network/pc_port_mirroring/enabled]
Enables port mirroring.
 [0] Disable (default) - The LAN/PC Network
interfaces operate in SWITCH mode.
 [1] Enable - The LAN/PC Network interfaces
operate in HUB mode. The network traffic on the
LAN port is reflected in the PC port.
Version 2.0.0 263 October 2012