Specifications

Administrator's Manual A. Server-Specific Configuration
43 Media Debug Information
Recording parameters allows you to debug the voice activity of the phone, using the Web
or Configuration File, as described below.
 To define media debug information:
 Using the Web:
1. Access the ‘Recording’ page (Status & Diagnostics tab > Diagnostics menu >
Recording).
Figure 43-1: Recording Web Fields
2. Configure Media Debug Recording according to the parameters in the table
below, and then click Submit.
 Using the Configuration File:
Table 43-1: Packet Recording Parameters
Parameter Description
Enable DSP Recording
[voip/packet_recording/enabled]
Activates the packet recording
mechanism.
 [0] Disable (default)
 [1] Enable
Remote IP Address or Host Name
[voip/packet_recording/remote_ip]
The IP address (in dotted-decimal
notation) of the remote computer to
which the recorded packets are sent.
The recorded packets should be
captured by a network sniffer (such as
Wireshark).
The default value is 0.0.0.0.
Remote Port
[voip/packet_recording/remote_port]
Defines the UDP port of the remote
computer to which the recorded
packets are sent.
The valid range is 1024 to 65535. The
default value is 50000.
Enable RTP Recording
[voip/packet_recording/rtp_recording/enabled]
Activates the DSP RTP recording.
 [0] Disable (default)
 [1] Enable
Version 2.0.0 261 October 2012