Specifications

Administrator's Manual A. Server-Specific Configuration
39.2.7 Speaker Test
Upon successful completion of the Headset test (in the previous section), perform the
Speaker test. This test verifies the correct functioning of the speakers, which includes the
following:
 Speaker microphone (transmitter) for speaking (recording)
 Speaker receiver for listening (playing)
 To test the speaker:
1. After about five seconds after your recorded voice is played in the Headset test (in the
previous section), the LCD screen displays the message "Speaker/Mic Test. Press
any key".
Figure 39-25: Speaker/Mic Test
2. Press any key; the LCD screen displays the message "Start recording".
Figure 39-26: Speaker/Mic Test– Recording
Version 2.0.0 251 October 2012