Specifications

Administrator's Manual A. Server-Specific Configuration
39.1.5 Headset Test
Upon successful completion of the Handset test (in the previous section), perform the
Headset test. This test verifies the correct functioning of the headset (for hands-free
operation), which includes the following:
 Headset’s microphone (transmitter) for speaking
 Headset’s headphone (receiver) for listening
 To test the headset:
1. After about five seconds after your recorded voice is played in the Handset test
(in the previous section), the LCD screen displays the message, ”Headset test.
Any key to start”.
Figure 39-7: Headset Test
2. Press any key; the LCD screen displays the ”Recording” message.
Figure 39-8: Headset Recording Test
3. Speak into the headset’s microphone; after about five seconds, the LCD screen
displays ”Playing” and the voice that was recorded when you spoke into the
headset’s microphone is now played from the headset’s receiver.
Figure 39-9: Headset Playing Test
4. Continue with the Speaker test in Section 39.1.6 on page 240.
Version 2.0.0 239 October 2012