Specifications

Administrator's Manual 30. Configuring 802.1x
30.2.2 EAP TLS Mode
This section describes how to configure phone’s 802.1x settings for EAP-TLS.
 To configure the phone’s 802.1x settings for EAP-TLS:
 Using the Web:
1. Access the ‘802.1X Settings’ page (Network Settings > 802.1X Settings).
Figure 30-2: EAP TLS Web Fields
2. Configure the 802.1x settings according to the parameters in the table below, and
then click Submit.
 Using the Configuration File:
Table 30-2: EAP TLS Parameters
Parameter Description
Identity
/network/lan/_802_1x/tls_identity
Identity for TLS mode. (optional)
Root and Intermediate Certificate Filename
[/network/lan/_802_1x/root_ca_url]
URL for the file that contains root and
intermediate Certificate.
Trusted Certificate Filename
[/network/lan/_802_1x/trust_ca_url]
URL for the file that contains a trusted
Certificate.
Local Certificate Filename
[/network/lan/_802_1x/local_ca_url]
URL for the file that contains a local
Certificate.
Private Key Filename
[/network/lan/_802_1x/private_key_url
URL for file that contains the private key.
Private Key Password
[/network/lan/_802_1x/private_key_password]
Optional: If the file that contains the private
key is encrypted, then this is the password
for decryption.
Version 2.0.0 201 October 2012