Specifications

310HD, 320HD and 420HD IP Phones
30.2 Configuring 802.1x using Web and Configuration File
802.1x can be configured using the Web or Configuration File, as described below.
30.2.1 EAP MD5 Mode
This section describes how to configure 802.1x settings for EAP-MD5.
 To configure the phone’s 802.1x settings for EAP-MD5:
 Using the Web:
1. Access the ‘802.1X Settings’ page (Network Connections > 802.1X Settings).
Figure 30-1: EAP MD5 Web Fields
2. Configure the 802.1x settings according to the parameters in the table below, and
then click Submit.
 Using the Configuration File:
Table 30-1: EAP MD5 Parameters
Parameter Description
EAP Type
[/network/lan/_802_1x/eap_type]
Sets 802.1x Extensible Authentication Protocol mode.
[Disable] = Disables the use of 802.1x
[EAP_MD5]=Authentication is implemented by user
name and password (Password is optional).
[EAP_TLS]= Authentication is implemented by
Certificate, Client Certificate and Client Private Key.
Identity
[/network/lan/_802_1x/md5_identity]
User ID for md5 mode.
MD5 password
[/network/lan/_802_1x/md5_password]
Password for md5 mode. (Leave blank if no
password).
Administrator's Manual 200 Document #: LTRT-09910