Specifications

310HD, 320HD and 420HD IP Phones
30.1.3 420HD IP Phone
Configuring 802.1x settings using the 420HD IP Phone is identical to configuring 802.1x
settings using the 320HD IP Phone.
 To configure 802.1x:
1. Access the Settings screen (MENU key > Administration menu > Network Settings
submenu).
2. Press the navigation control's lower rim to navigate to 802.1X Settings and then press
the Select softkey.
3. Press the navigation control's lower or upper rim to navigate to and select either:
• Disabled – disables the 802.1x feature
• EAP-MD5 – see Section 30.1.3.1
• EAP-TLS - see Section 30.1.3.2
30.1.3.1 EAP-MD5 Mode
The procedure for configuring EAP-MD5 mode for 802.1x is described below.
 To configure EAP-MD5 mode for 802.1x:
1. Press the navigation control's lower rim to navigate to the EAP-MD5 option and then
press Select and Edit:
2. Enter the following information:
• Identity: User ID
• Password: MD5 password (optional)
3. Press the Save softkey; a message appears notifying you that the phone will restart.
4. Press Apply.
Administrator's Manual 198 Document #: LTRT-09910