Specifications

Administrator's Manual 30. Configuring 802.1x
30.1.1.2 EAP-TLS Mode
This option enables the 802.1x feature in EAP-TLS mode. In this mode, define the
following:
 To enable the 802.1x feature in EAP-TLS mode
1. Define the following:
♦ Identity: Enables the User ID.
♦ Root Cert. URL: Enables the full URL of the file which contains the root
certification file.
♦ Trusted Cert URL: Enables the full URL of the file which contains the
trusted certification file.
♦ Local Cert URL: Enables the full URL of the file which contains the local
certification file.
♦ Private key URL: Enables the full URL of the file which contains the private
key file.
♦ Private key Password: (Optional) In case the private key file is encrypted,
input the password to decrypt the file.
2. Press the left Navigation key until you are prompted to save settings, as
shown below:
3. Select the Yes option (using the and Navigation keys), and then press the
ENTER key; the settings are saved.
Version 2.0.0 195 October 2012