Specifications

Administrator's Manual 27. Transport Layer Security and Certificate Management
27.2.2 Manually Configuring TLS using the Web
This section describes how to manually configure TLS for a single telephone using the
Web.
In this procedure, associate the CA Certificate file and the Private key files to the
respective configuration parameter.
Notes:
• Before performing this procedure, ensure that you have saved the
CA Certificate file and the Private key files in an accessible location.
• This procedure is generally used for evaluation purposes only.
• For parameter descriptions, see Table 27-2.
 To configure TLS using the Web:
1. Access the ‘Signaling Protocols’ page (Configuration tab > Voice Over IP menu >
Signaling Protocols > SIP General).
2. From the ‘SIP Transport Protocol’ drop-down list, select TLS.
3. In the ‘TLS Port field’, enter “5061”.
Figure 27-3: TLS Port and CA Certification Web Fields
4. Load the CA certification file (*.cer) using Browse and Load buttons.
5. Load the combined Private Key and Public Key (*.cer) file using Browse and Load
buttons.
Version 2.0.0 187 October 2012