Specifications

Administrator's Manual 23. Volume Levels
23.3 Configuring Ringer Volume
The ringer volume can be configured using the Web or Configuration File, as described
below.
 To configure the ringer volume:
 Using the Web:
1. Access the ‘Volume Setting page (Configuration tab > Voice Over IP menu >
Volume Settings).
Figure 23-3: Ringer Volume Web Field
2. Configure the ringer volume settings according to the parameters in the table
below, and then click Submit.
 Using the Configuration file:
Table 23-3: Ringer Volume Parameters
Parameter Description
Ringer Volume
voip/audio/gain/ringer_signal_level
Ringing tone volume. This volume can be modified on-the-
fly by pressing the phone’s VOLUME key when the phone
is in idle state.
The valid range is [-31] to [31] dB
Version 2.0.0 153 October 2012