Specifications

310HD, 320HD and 420HD IP Phones
23.2 Configuring Tone Volume
Tone volume can be configured using the Web or Configuration File, as described below.
To configure tone volume:
Using the Web:
1. Access the ‘Volume Setting’ page (Configuration tab > Voice Over IP menu >
Volume Settings).
Figure 23-2: Tone Volume Web Field
2. Configure the tones volume settings according to the parameters in the table
below, and then click Submit.
Using the Configuration file:
Table 23-2: Tone Volume Parameter
Parameter Description
Tone Volume
[voip/audio/gain/tone_signal_level]
Call progress tone volume. This volume can be modified
on-the-fly by pressing the phone’s VOLUME key in certain
scenarios.
The valid range is 1 to 31 (-dB). The default value is 10 (-
10dB).
Administrator's Manual 152 Document #: LTRT-09910