Specifications

Administrator's Manual 22. Supplementary Services
22.8 Configuring Call Pickup
Since the Call Pickup feature is relevant only when Busy Lamp Field (BLF) is activated, the
call pickup parameters appear as BLF related parameters.
 To configure Call Pickup :
 Using the Web:
1. Access the ‘Services’ page (Configuration tab > Voice Over IP menu >
Services).
Figure 22-6: Call Pick Up Web Fields
2. Under the BLF Support group, ensure that the ‘Activate’ field is set to “Enable”.
3. Configure Call Pickup according to the parameters in the table below, and then
click Submit.
Table 22-7: Call Pickup Parameters
Parameter Description
Call Pick Up
[/voip/services/call_pickup/enabled]
Allows call pickup by pressing on the relevant BLF
key when the state of the remote phone is “ringing”.
 [0] Disable
 [1] Enable
[voip/services/call_pickup/access_code]
The phone supports the Call Pick-Up feature,
whereby the user can answer someone else's
telephone call by pressing a user-defined sequence
of phone keys. When the user dials the user-defined
digits plus the other phone number, the incoming
call from the other phone is forwarded to the user's
phone.
The default key sequence is **.
For example, to pick up a call for extension 5000
dial **5000.
Version 2.0.0 143 October 2012