Specifications

Administrator's Manual 22. Supplementary Services
22.3 Configuring Call Forwarding
Call Forwarding can be configured using the Web or Configuration File, as described
below.
 To configure call forwarding:
 Using the Web:
1. Access the ‘Services’ page (Configuration tab > Voice Over IP menu >
Services).
Figure 22-2: Call Forwarding Web Fields
2. Configure the Call Forwarding parameters according to the table below, and then
click Submit.
 Using the Configuration file:
Table 22-2: Call Forward Parameters
Parameter Description
voip/line/%d/call_forward/enabled
Enables the Call Forward feature.
 [0] Disable
 [1] Enable (default)
Call Forward Type
[voip/line/%d/call_forward/type]
Determines the condition upon which incoming
calls are forwarded to another destination:
 [Unconditional] Unconditional - incoming
calls are forwarded independently of the
status of the line.
 [Busy] Busy - incoming calls are forwarded
only if the phone is busy.
 [No_Reply] No Reply (default) - incoming
calls are forwarded only if the phone does not
answer before a user-defined timeout.
Forward on No Reply Timeout
[voip/line/%d/call_forward/timeout]
If calls are forwarded when the condition is No-
Reply, then this parameter defines the time (in
seconds) after which incoming calls are
forwarded when this is no reply.
The valid range is 0 to 7200. The default value is
6.
Forward Destination
[voip/line/%d/call_forward/destination]
The destination to which the call is directed when
call forward is activated.
Version 2.0.0 137 October 2012