Specifications

Administrator's Manual 19. Media Settings
19.3 Configuring RTP QoS
RTP QoS can be configured using the Web or Configuration File, as described below.
 To configure RTP QoS:
 Using the Web:
1. Access the ‘Media Streaming’ page (Configuration tab > Voice Over IP menu >
Media Streaming).
Figure 19-2: QoS Web Fields
2. Configure the RTP QoS parameters according to the table below, and then click
Submit.
 Using the Configuration file:
Table 19-3: RTP QoS Parameters
Parameter Description
Type of Service (ToS)
[voip/media/media_tos]
QoS in hexadecimal format. This is a part of the IP header
that defines the type of routing service to tag outgoing voice
packets originated from the phone. It informs routers that this
packet must receive a specific QoS. The default value is
0xb8.
Values can be set in decimal (e.g. 184) or hexadecimal (e.g.
0xb8).
Version 2.0.0 119 October 2012