Specifications

310HD, 320HD and 420HD IP Phones
18.3 Configuring Default Audio Device
Default Audio Device Tones settings can be configured using the Web or Configuration
File, as described below.
 To configure default Audio Device:
 Using the Web:
1. Access the ‘Dialing’ page (Configuration tab > Voice Over IP menu > Dialing).
Figure 18-6: Default Audio Device Web Field
2. Configure the parameter according to the table below and then click Submit.
 Using the Configuration file:
Table 18-5: Audio Device Parameter
Parameter Description
Audio Device
[voip/answer_device]
Sets the default audio device to answer or initiate a new call
when no explicit audio device is set.
For example:
 When pressing ANS SK.
 When initiating a call by speed dial key, call history or
phone directory.
 Answering talk event or auto-answer.
 When starting to dial in “on hook” mode.
Valid values are:
 [SPEAKER]
 [HEADSET]
Administrator's Manual 112 Document #: LTRT-09910